For optimum charging of the Jaguar I-Pace at home, you can purchase and install a Jaguar approved home charger. The I‑PACE is equipped with a 7-kW single-phase AC on-board charger, which can fully recharge the vehicle overnight when using a Jaguar approved home charger. Alternatively, the Jaguar I-PACE can be plugged in directly to a domestic socket. We do it with our phones; we plug them in overnight and leave the next day fully charged. Now Long Island drivers can enjoy that convenience by charging their cars. Take the opportunity to wake up each morning with a full tank of battery power.

Jaguar makes installing a charging station at home very straight forward for Jaguar Huntington customers. Level 1 chargers use the supply cable and plug with your EV and plugging it into a standard domestic power supply, a 120-volt outlet. This typically takes 6times longer to charge your vehicle than a level-two charge. While charging directly via a domestic socket is slower than with a home charger, it should be enough to cover the average daily commute of 30 miles if the vehicle is charged overnight.

Jaguar recommends a Level 2 charge point charger for your home charger. Small, neat, and compact, with a robust yet simple design. Specify the length of the charging cable that you need in your space, either 25 feet or 18 feet. There are two options of level 2 chargers rated at 32 amps for you to choose from:

  • Wall plug-in- the advantage of the plug-in version is that you can take it with you when you move to a new house. Like having your own transportable fuel station.
  • Hardwired- can be used indoors, but primarily for outdoor use; the cabling from the charger to the power supply will need to be chased into the wall. This protects the electrical connections from the elements.

How to Install the At-Home Charging Station

Level 2 charging stations do not use a normal wall socket; you will need to speak to a certified installer who will recommend a NEMA 6-50 outlet. A NEMA 6-50 is a 40-amp service that is run from your breaker panel. A certified installer will recommend and fit dedicated circuit breakers for the home charger. The socket needs to be positioned between 12-inch below where your charger is going to go. It is installed upside-down so that the cable runs neatly up to the charger. For home installation where a wall outlet exists, the installer will run a cable through conduit or route it inside the wall.

These charging stations use Wi-Fi and Bluetooth to connect to your IOS or Android smartphone. Consider placing your chargers so that they are easily able to pick up the Wi-Fi signal. This connection will give you access to the Jaguar Remote app, allowing you to set charging times and levels. Chare point has a similar app for setting charging reminders and remotely updating the charging station when new features become available.

If your property needs more substantial upgrading of its electricity supply to accommodate the 240-volt charge, the certified install can talk you through your specific needs. A city permit may need to be pulled for the work, or a site visit or inspection sign off might be necessary. An accredited install can organize those situations as they arise, saving you time and hassle.

Finding a Certified Technician

Use a Jaguar recommended partner for the setup and installing phase. Jaguar connects customers to appropriate installers in their area. All the installers are vetted, trained, and accredited by Jaguar. They guaranteed a job well-done and peace of mind. Whether you choose to have your installer run cable through conduit or route it inside a wall, the certified Jaguar installer will provide you with a quote for the work. Skip gathering quotes yourself with the Jaguar installation questionnaire. Arrange for an accredited installer to do the work for you online or calling one in your area to schedule a visit.


Make an Inquiry